Free Web Hosting by Netfirms
Web Hosting by Netfirms | Free Domain Names by Netfirms
MicroMotion use0405

Micro Motion Mouse Control

Programmed PIC16F628A Microprocessors are available in 18 pin DIP, small quantities for $ 11.95 + $3.00 S&H.
100 or more Programmed Processors in 18 pin DIP or SOIC are $3.65 each + Shipping

The Processor in Micro Motion Mouse Control is socketed for easy removal to use in your own prototypes. Input should be anything you can plug into a PS/2 mouse port. The output is fine tuned for Allegro stepper driver / translators. The default speed is logic high and alternates with each L + R click or R + L click button combination. The left and right button pins are normally low and go high when a button is pressed for wake from sleep or chip select. The X and Y step outputs are normally high with 5 ms low pulses. If you are using driver / translators that require a different input, let us know.
Please e-mail us at or call us at 561-775-1916.
PIC Schematic0502

[Motion Mouse Control] [Applications] [Specifications] [Motor Wiring] [Processor Only] [Services]